Date   

Skype 8 ringing device

Nick Giannak III
 

Hello all.

I'm sending this here because I suspect some of you have contact with Microsoft. I upgraded to Skype 8, and I honestly find it not bad at all accessibility-wise, far from the horror show it was depicted as. I can even use it with speed, which isn't always easy to do in this day and age. I'm even going to find out how it does on air in a few hours...And here's the rub.

Is there any way to have Skype 7 behavior, wherein Skype will ring through one sound device, but not the same one as conversations play?

I do appreciate that this is lightyears better than Skype 8 was when it came out, based on things I've seen. I hope it continues to get better!
Thanks,
Nick


Re: Skype 8 language and prefix key

Jean Philippe
 

Doug. That was it. Bravo!

It does not explain why the default key was not working before, but I was able to assign mine.

It is the one just under the escape key, which unfortunately does not have the same assignment on all keyboards but I find it's place convenient for a prefix key.

Best regards,

JPR



http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 11/10/2018 à 00:39, Doug Lee a écrit :
Works in all Skype windows... but I think I just spotted the issue:

MKCSOptions needs brackets around it, to conform to .ini file syntax which is the syntax of jcf files:

[MKCSOptions]
CommandKey=r

But if your bracket keys are typing something else, who knows what you ended up with. :-)

ASCII values of interest:
[ is 91
] is 93

On Thu, Oct 11, 2018 at 12:05:19AM +0200, Jean Philippe wrote:
Hi Doug,

take your time. Here is the last thing I did,

wrote this ridiculous line in the JCF file :

MKCSOptions
CommandKey=r

Saved it and went back to Skype. But the letter r did not act as a prefix key
either. One question, does the prefix key work in all Skype windows? Could I
be in the wrong window?

But no rush hey.

JPR



http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 23:29, Doug Lee a ??crit??:
Ideas to try besides a temporary letter:
` or accent
~ or Shift+` or Shift+accent
< or Shift+,
F2 Shift+F2 etc.

A bit of tech info to help your curiosity:

When you type a key, one thing that happens is a KeyPressedEvent call, into which a key name is passed. It is this name that we need, because my code uses that name to recognize the prefix key. The name is usually the literal
key for letters and numbers in my experience, but I don't know how that works in all languages.

I'm sorry my answers have been brief today. I'm working on several other projects and have not had a chance to dig very deep into this.

On Wed, Oct 10, 2018 at 09:42:46PM +0200, Jean Philippe wrote:
Hi Doug,

Jaws says something like superscript 2, But I don't know if I spell it right.
Does it help?

Anyway, I would still like to know why the default prefix key does not work
either.

I could even try another key if you want, even a letter would do I imagine,
and I can take one that is the same for French and English keyboards. What do
you say?


Best,

JPR


http://www.jprykiel.com

http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 21:24, Doug Lee a ??crit??:
And any ASCII value above decimal 127 is out of the normal range for printable characters; so I expect that key has a name in JAWS. We just need to know what it is.

On Wed, Oct 10, 2018 at 09:17:48PM +0200, Jean Philippe wrote:
Wow. stranger. The ASCII value is 178 .
Cheers,
JPR

http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 20:48, Doug Lee a ??crit??:
In my mail program, the first key name you gave prints as ?? so I can't tell what it is. ` printed fine.

Most likely, the key name we want is the one that goes through the KeyPressedEvent function as the value of strKeyName when you press the key; but it takes some considerable fiddling to get that name to print, unless
I missed a tactic somewhere.

On Wed, Oct 10, 2018 at 08:31:46PM +0200, Jean Philippe wrote:
Hi Doug,

the key I would like to assign is??, which is the same as` on a French
keyboard.

But even in other jaws versions where I haven't changed the JCF file, the
default key,left bracket, is not working. I know how odd it may sound.

Best,

JPR


http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 19:35, Doug Lee a ??crit??:
I still bet the problem is that JAWS wants a particular name for that key instead of just the key itself.

Apologies if I missed it amid all else today lol, but what key are you trying to assign as the Command key? If it is a shifted key, use "Shift+" with the regular key or key name; e.g., CommandKey=T is bad, but
CommandKey=Shift+t is good.

On Wed, Oct 10, 2018 at 06:40:39PM +0200, Jean Philippe wrote:
Hi Michele.

I can confirm that no Extra file has been created and that the CFG Replace the
Previous one, as its Modification date is today.

I think I tried everything I could, including removing all files from the
Skype seven scripts, who knows, and switching to the English version of jaws
where scripts Were also installed.

What else can I try? Something in Jaws commun?? settings that could get in the
way maybe
? I have no idea.

Best,

JPR


http://www.jprykiel.com

http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 14:28, Michele Barbi a ??crit??:
Hey guys, first of all I'd like to thank Doug because I did not know these
step for copying the file location. We always learn something new, lol!
Jean, be careful to one thing which I noticed. I don't know why, but at
least here in Italian, ctrl+s opens a window like Save as, and if asked to
replace already existing file, you should say yes.
I am now reading that you did not manage to fix the issue, so make sure if
Notepad did not create an alternative file called skypeelectron.jcf.txt.
Yesterday I had to count with it working on a jsm file for another scripts
set.
Bye!
Barbuz





Re: Skype 8 language and prefix key

Doug Lee
 

Works in all Skype windows... but I think I just spotted the issue:

MKCSOptions needs brackets around it, to conform to .ini file syntax which is the syntax of jcf files:

[MKCSOptions]
CommandKey=r

But if your bracket keys are typing something else, who knows what you ended up with. :-)

ASCII values of interest:
[ is 91
] is 93

On Thu, Oct 11, 2018 at 12:05:19AM +0200, Jean Philippe wrote:
Hi Doug,

take your time. Here is the last thing I did,

wrote this ridiculous line in the JCF file :

MKCSOptions
CommandKey=r

Saved it and went back to Skype. But the letter r did not act as a prefix key
either. One question, does the prefix key work in all Skype windows? Could I
be in the wrong window?

But no rush hey.

JPR



http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 23:29, Doug Lee a ??crit??:
Ideas to try besides a temporary letter:
` or accent
~ or Shift+` or Shift+accent
< or Shift+,
F2 Shift+F2 etc.

A bit of tech info to help your curiosity:

When you type a key, one thing that happens is a KeyPressedEvent call, into which a key name is passed. It is this name that we need, because my code uses that name to recognize the prefix key. The name is usually the literal
key for letters and numbers in my experience, but I don't know how that works in all languages.

I'm sorry my answers have been brief today. I'm working on several other projects and have not had a chance to dig very deep into this.

On Wed, Oct 10, 2018 at 09:42:46PM +0200, Jean Philippe wrote:
Hi Doug,

Jaws says something like superscript 2, But I don't know if I spell it right.
Does it help?

Anyway, I would still like to know why the default prefix key does not work
either.

I could even try another key if you want, even a letter would do I imagine,
and I can take one that is the same for French and English keyboards. What do
you say?


Best,

JPR


http://www.jprykiel.com

http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 21:24, Doug Lee a ??crit??:
And any ASCII value above decimal 127 is out of the normal range for printable characters; so I expect that key has a name in JAWS. We just need to know what it is.

On Wed, Oct 10, 2018 at 09:17:48PM +0200, Jean Philippe wrote:
Wow. stranger. The ASCII value is 178 .
Cheers,
JPR

http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 20:48, Doug Lee a ??crit??:
In my mail program, the first key name you gave prints as ?? so I can't tell what it is. ` printed fine.

Most likely, the key name we want is the one that goes through the KeyPressedEvent function as the value of strKeyName when you press the key; but it takes some considerable fiddling to get that name to print, unless
I missed a tactic somewhere.

On Wed, Oct 10, 2018 at 08:31:46PM +0200, Jean Philippe wrote:
Hi Doug,

the key I would like to assign is??, which is the same as` on a French
keyboard.

But even in other jaws versions where I haven't changed the JCF file, the
default key,left bracket, is not working. I know how odd it may sound.

Best,

JPR


http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 19:35, Doug Lee a ??crit??:
I still bet the problem is that JAWS wants a particular name for that key instead of just the key itself.

Apologies if I missed it amid all else today lol, but what key are you trying to assign as the Command key? If it is a shifted key, use "Shift+" with the regular key or key name; e.g., CommandKey=T is bad, but
CommandKey=Shift+t is good.

On Wed, Oct 10, 2018 at 06:40:39PM +0200, Jean Philippe wrote:
Hi Michele.

I can confirm that no Extra file has been created and that the CFG Replace the
Previous one, as its Modification date is today.

I think I tried everything I could, including removing all files from the
Skype seven scripts, who knows, and switching to the English version of jaws
where scripts Were also installed.

What else can I try? Something in Jaws commun?? settings that could get in the
way maybe
? I have no idea.

Best,

JPR


http://www.jprykiel.com

http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 14:28, Michele Barbi a ??crit??:
Hey guys, first of all I'd like to thank Doug because I did not know these
step for copying the file location. We always learn something new, lol!
Jean, be careful to one thing which I noticed. I don't know why, but at
least here in Italian, ctrl+s opens a window like Save as, and if asked to
replace already existing file, you should say yes.
I am now reading that you did not manage to fix the issue, so make sure if
Notepad did not create an alternative file called skypeelectron.jcf.txt.
Yesterday I had to count with it working on a jsm file for another scripts
set.
Bye!
Barbuz







--
Doug Lee dgl@... http://www.dlee.org
Level Access doug.lee@... http://www.LevelAccess.com
In healthy competition, the best battles are not for status, but for excellence;
and the battles are not between me and you,
but between you and you, and between me and me. (08/15/2009)


Re: Skype 8 language and prefix key

Jean Philippe
 

Hi Doug,

take your time. Here is the last thing I did,

wrote this ridiculous line in the JCF file :

MKCSOptions
CommandKey=r

Saved it and went back to Skype. But the letter r did not act as a prefix key either. One question, does the prefix key work in all Skype windows? Could I be in the wrong window?

But no rush hey.

JPR



http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 à 23:29, Doug Lee a écrit :
Ideas to try besides a temporary letter:
` or accent
~ or Shift+` or Shift+accent
< or Shift+,
F2 Shift+F2 etc.

A bit of tech info to help your curiosity:

When you type a key, one thing that happens is a KeyPressedEvent call, into which a key name is passed. It is this name that we need, because my code uses that name to recognize the prefix key. The name is usually the literal
key for letters and numbers in my experience, but I don't know how that works in all languages.

I'm sorry my answers have been brief today. I'm working on several other projects and have not had a chance to dig very deep into this.

On Wed, Oct 10, 2018 at 09:42:46PM +0200, Jean Philippe wrote:
Hi Doug,

Jaws says something like superscript 2, But I don't know if I spell it right.
Does it help?

Anyway, I would still like to know why the default prefix key does not work
either.

I could even try another key if you want, even a letter would do I imagine,
and I can take one that is the same for French and English keyboards. What do
you say?


Best,

JPR


http://www.jprykiel.com

http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 21:24, Doug Lee a ??crit??:
And any ASCII value above decimal 127 is out of the normal range for printable characters; so I expect that key has a name in JAWS. We just need to know what it is.

On Wed, Oct 10, 2018 at 09:17:48PM +0200, Jean Philippe wrote:
Wow. stranger. The ASCII value is 178 .
Cheers,
JPR

http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 20:48, Doug Lee a ??crit??:
In my mail program, the first key name you gave prints as ?? so I can't tell what it is. ` printed fine.

Most likely, the key name we want is the one that goes through the KeyPressedEvent function as the value of strKeyName when you press the key; but it takes some considerable fiddling to get that name to print, unless
I missed a tactic somewhere.

On Wed, Oct 10, 2018 at 08:31:46PM +0200, Jean Philippe wrote:
Hi Doug,

the key I would like to assign is??, which is the same as` on a French
keyboard.

But even in other jaws versions where I haven't changed the JCF file, the
default key,left bracket, is not working. I know how odd it may sound.

Best,

JPR


http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 19:35, Doug Lee a ??crit??:
I still bet the problem is that JAWS wants a particular name for that key instead of just the key itself.

Apologies if I missed it amid all else today lol, but what key are you trying to assign as the Command key? If it is a shifted key, use "Shift+" with the regular key or key name; e.g., CommandKey=T is bad, but
CommandKey=Shift+t is good.

On Wed, Oct 10, 2018 at 06:40:39PM +0200, Jean Philippe wrote:
Hi Michele.

I can confirm that no Extra file has been created and that the CFG Replace the
Previous one, as its Modification date is today.

I think I tried everything I could, including removing all files from the
Skype seven scripts, who knows, and switching to the English version of jaws
where scripts Were also installed.

What else can I try? Something in Jaws commun?? settings that could get in the
way maybe
? I have no idea.

Best,

JPR


http://www.jprykiel.com

http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 14:28, Michele Barbi a ??crit??:
Hey guys, first of all I'd like to thank Doug because I did not know these
step for copying the file location. We always learn something new, lol!
Jean, be careful to one thing which I noticed. I don't know why, but at
least here in Italian, ctrl+s opens a window like Save as, and if asked to
replace already existing file, you should say yes.
I am now reading that you did not manage to fix the issue, so make sure if
Notepad did not create an alternative file called skypeelectron.jcf.txt.
Yesterday I had to count with it working on a jsm file for another scripts
set.
Bye!
Barbuz





Re: Skype 8 language and prefix key

Doug Lee
 

Ideas to try besides a temporary letter:
` or accent
~ or Shift+` or Shift+accent
< or Shift+,
F2 Shift+F2 etc.

A bit of tech info to help your curiosity:

When you type a key, one thing that happens is a KeyPressedEvent call, into which a key name is passed. It is this name that we need, because my code uses that name to recognize the prefix key. The name is usually the literal
key for letters and numbers in my experience, but I don't know how that works in all languages.

I'm sorry my answers have been brief today. I'm working on several other projects and have not had a chance to dig very deep into this.

On Wed, Oct 10, 2018 at 09:42:46PM +0200, Jean Philippe wrote:
Hi Doug,

Jaws says something like superscript 2, But I don't know if I spell it right.
Does it help?

Anyway, I would still like to know why the default prefix key does not work
either.

I could even try another key if you want, even a letter would do I imagine,
and I can take one that is the same for French and English keyboards. What do
you say?


Best,

JPR


http://www.jprykiel.com

http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 21:24, Doug Lee a ??crit??:
And any ASCII value above decimal 127 is out of the normal range for printable characters; so I expect that key has a name in JAWS. We just need to know what it is.

On Wed, Oct 10, 2018 at 09:17:48PM +0200, Jean Philippe wrote:
Wow. stranger. The ASCII value is 178 .
Cheers,
JPR

http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 20:48, Doug Lee a ??crit??:
In my mail program, the first key name you gave prints as ?? so I can't tell what it is. ` printed fine.

Most likely, the key name we want is the one that goes through the KeyPressedEvent function as the value of strKeyName when you press the key; but it takes some considerable fiddling to get that name to print, unless
I missed a tactic somewhere.

On Wed, Oct 10, 2018 at 08:31:46PM +0200, Jean Philippe wrote:
Hi Doug,

the key I would like to assign is??, which is the same as` on a French
keyboard.

But even in other jaws versions where I haven't changed the JCF file, the
default key,left bracket, is not working. I know how odd it may sound.

Best,

JPR


http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 19:35, Doug Lee a ??crit??:
I still bet the problem is that JAWS wants a particular name for that key instead of just the key itself.

Apologies if I missed it amid all else today lol, but what key are you trying to assign as the Command key? If it is a shifted key, use "Shift+" with the regular key or key name; e.g., CommandKey=T is bad, but
CommandKey=Shift+t is good.

On Wed, Oct 10, 2018 at 06:40:39PM +0200, Jean Philippe wrote:
Hi Michele.

I can confirm that no Extra file has been created and that the CFG Replace the
Previous one, as its Modification date is today.

I think I tried everything I could, including removing all files from the
Skype seven scripts, who knows, and switching to the English version of jaws
where scripts Were also installed.

What else can I try? Something in Jaws commun?? settings that could get in the
way maybe
? I have no idea.

Best,

JPR


http://www.jprykiel.com

http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 14:28, Michele Barbi a ??crit??:
Hey guys, first of all I'd like to thank Doug because I did not know these
step for copying the file location. We always learn something new, lol!
Jean, be careful to one thing which I noticed. I don't know why, but at
least here in Italian, ctrl+s opens a window like Save as, and if asked to
replace already existing file, you should say yes.
I am now reading that you did not manage to fix the issue, so make sure if
Notepad did not create an alternative file called skypeelectron.jcf.txt.
Yesterday I had to count with it working on a jsm file for another scripts
set.
Bye!
Barbuz







--
Doug Lee dgl@... http://www.dlee.org
Level Access doug.lee@... http://www.LevelAccess.com
"The best executive is the one who has sense enough to pick good men to do
what he wants done, and self-restraint enough to keep from meddling with
them while they do it."--Theodore Roosevelt


Re: Skype 8 language and prefix key

Jean Philippe
 

Hi Doug,

Jaws says something like superscript 2, But I don't know if I spell it right. Does it help?

Anyway, I would still like to know why the default prefix key does not work either.

I could even try another key if you want, even a letter would do I imagine, and I can take one that is the same for French and English keyboards. What do you say?


Best,

JPR


http://www.jprykiel.com

http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 à 21:24, Doug Lee a écrit :
And any ASCII value above decimal 127 is out of the normal range for printable characters; so I expect that key has a name in JAWS. We just need to know what it is.

On Wed, Oct 10, 2018 at 09:17:48PM +0200, Jean Philippe wrote:
Wow. stranger. The ASCII value is 178 .
Cheers,
JPR

http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 20:48, Doug Lee a ??crit??:
In my mail program, the first key name you gave prints as ?? so I can't tell what it is. ` printed fine.

Most likely, the key name we want is the one that goes through the KeyPressedEvent function as the value of strKeyName when you press the key; but it takes some considerable fiddling to get that name to print, unless
I missed a tactic somewhere.

On Wed, Oct 10, 2018 at 08:31:46PM +0200, Jean Philippe wrote:
Hi Doug,

the key I would like to assign is??, which is the same as` on a French
keyboard.

But even in other jaws versions where I haven't changed the JCF file, the
default key,left bracket, is not working. I know how odd it may sound.

Best,

JPR


http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 19:35, Doug Lee a ??crit??:
I still bet the problem is that JAWS wants a particular name for that key instead of just the key itself.

Apologies if I missed it amid all else today lol, but what key are you trying to assign as the Command key? If it is a shifted key, use "Shift+" with the regular key or key name; e.g., CommandKey=T is bad, but
CommandKey=Shift+t is good.

On Wed, Oct 10, 2018 at 06:40:39PM +0200, Jean Philippe wrote:
Hi Michele.

I can confirm that no Extra file has been created and that the CFG Replace the
Previous one, as its Modification date is today.

I think I tried everything I could, including removing all files from the
Skype seven scripts, who knows, and switching to the English version of jaws
where scripts Were also installed.

What else can I try? Something in Jaws commun?? settings that could get in the
way maybe
? I have no idea.

Best,

JPR


http://www.jprykiel.com

http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 14:28, Michele Barbi a ??crit??:
Hey guys, first of all I'd like to thank Doug because I did not know these
step for copying the file location. We always learn something new, lol!
Jean, be careful to one thing which I noticed. I don't know why, but at
least here in Italian, ctrl+s opens a window like Save as, and if asked to
replace already existing file, you should say yes.
I am now reading that you did not manage to fix the issue, so make sure if
Notepad did not create an alternative file called skypeelectron.jcf.txt.
Yesterday I had to count with it working on a jsm file for another scripts
set.
Bye!
Barbuz





Re: Skype 8 language and prefix key

Doug Lee
 

And any ASCII value above decimal 127 is out of the normal range for printable characters; so I expect that key has a name in JAWS. We just need to know what it is.

On Wed, Oct 10, 2018 at 09:17:48PM +0200, Jean Philippe wrote:
Wow. stranger. The ASCII value is 178 .
Cheers,
JPR

http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 20:48, Doug Lee a ??crit??:
In my mail program, the first key name you gave prints as ?? so I can't tell what it is. ` printed fine.

Most likely, the key name we want is the one that goes through the KeyPressedEvent function as the value of strKeyName when you press the key; but it takes some considerable fiddling to get that name to print, unless
I missed a tactic somewhere.

On Wed, Oct 10, 2018 at 08:31:46PM +0200, Jean Philippe wrote:
Hi Doug,

the key I would like to assign is??, which is the same as` on a French
keyboard.

But even in other jaws versions where I haven't changed the JCF file, the
default key,left bracket, is not working. I know how odd it may sound.

Best,

JPR


http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 19:35, Doug Lee a ??crit??:
I still bet the problem is that JAWS wants a particular name for that key instead of just the key itself.

Apologies if I missed it amid all else today lol, but what key are you trying to assign as the Command key? If it is a shifted key, use "Shift+" with the regular key or key name; e.g., CommandKey=T is bad, but
CommandKey=Shift+t is good.

On Wed, Oct 10, 2018 at 06:40:39PM +0200, Jean Philippe wrote:
Hi Michele.

I can confirm that no Extra file has been created and that the CFG Replace the
Previous one, as its Modification date is today.

I think I tried everything I could, including removing all files from the
Skype seven scripts, who knows, and switching to the English version of jaws
where scripts Were also installed.

What else can I try? Something in Jaws commun?? settings that could get in the
way maybe
? I have no idea.

Best,

JPR


http://www.jprykiel.com

http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 14:28, Michele Barbi a ??crit??:
Hey guys, first of all I'd like to thank Doug because I did not know these
step for copying the file location. We always learn something new, lol!
Jean, be careful to one thing which I noticed. I don't know why, but at
least here in Italian, ctrl+s opens a window like Save as, and if asked to
replace already existing file, you should say yes.
I am now reading that you did not manage to fix the issue, so make sure if
Notepad did not create an alternative file called skypeelectron.jcf.txt.
Yesterday I had to count with it working on a jsm file for another scripts
set.
Bye!
Barbuz







--
Doug Lee dgl@... http://www.dlee.org
Level Access doug.lee@... http://www.LevelAccess.com
"Our chief want in life is somebody who will make us do what
we can. {Ralph Waldo Emerson}


Re: Skype 8 language and prefix key

Jean Philippe
 

Le 10/10/2018 à 20:48, Doug Lee a écrit :
In my mail program, the first key name you gave prints as ?? so I can't tell what it is. ` printed fine.

Most likely, the key name we want is the one that goes through the KeyPressedEvent function as the value of strKeyName when you press the key; but it takes some considerable fiddling to get that name to print, unless
I missed a tactic somewhere.

On Wed, Oct 10, 2018 at 08:31:46PM +0200, Jean Philippe wrote:
Hi Doug,

the key I would like to assign is??, which is the same as` on a French
keyboard.

But even in other jaws versions where I haven't changed the JCF file, the
default key,left bracket, is not working. I know how odd it may sound.

Best,

JPR


http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 19:35, Doug Lee a ??crit??:
I still bet the problem is that JAWS wants a particular name for that key instead of just the key itself.

Apologies if I missed it amid all else today lol, but what key are you trying to assign as the Command key? If it is a shifted key, use "Shift+" with the regular key or key name; e.g., CommandKey=T is bad, but
CommandKey=Shift+t is good.

On Wed, Oct 10, 2018 at 06:40:39PM +0200, Jean Philippe wrote:
Hi Michele.

I can confirm that no Extra file has been created and that the CFG Replace the
Previous one, as its Modification date is today.

I think I tried everything I could, including removing all files from the
Skype seven scripts, who knows, and switching to the English version of jaws
where scripts Were also installed.

What else can I try? Something in Jaws commun?? settings that could get in the
way maybe
? I have no idea.

Best,

JPR


http://www.jprykiel.com

http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 14:28, Michele Barbi a ??crit??:
Hey guys, first of all I'd like to thank Doug because I did not know these
step for copying the file location. We always learn something new, lol!
Jean, be careful to one thing which I noticed. I don't know why, but at
least here in Italian, ctrl+s opens a window like Save as, and if asked to
replace already existing file, you should say yes.
I am now reading that you did not manage to fix the issue, so make sure if
Notepad did not create an alternative file called skypeelectron.jcf.txt.
Yesterday I had to count with it working on a jsm file for another scripts
set.
Bye!
Barbuz





Re: Skype 8 language and prefix key

Doug Lee
 

In my mail program, the first key name you gave prints as ?? so I can't tell what it is. ` printed fine.

Most likely, the key name we want is the one that goes through the KeyPressedEvent function as the value of strKeyName when you press the key; but it takes some considerable fiddling to get that name to print, unless
I missed a tactic somewhere.

On Wed, Oct 10, 2018 at 08:31:46PM +0200, Jean Philippe wrote:
Hi Doug,

the key I would like to assign is??, which is the same as` on a French
keyboard.

But even in other jaws versions where I haven't changed the JCF file, the
default key,left bracket, is not working. I know how odd it may sound.

Best,

JPR


http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 19:35, Doug Lee a ??crit??:
I still bet the problem is that JAWS wants a particular name for that key instead of just the key itself.

Apologies if I missed it amid all else today lol, but what key are you trying to assign as the Command key? If it is a shifted key, use "Shift+" with the regular key or key name; e.g., CommandKey=T is bad, but
CommandKey=Shift+t is good.

On Wed, Oct 10, 2018 at 06:40:39PM +0200, Jean Philippe wrote:
Hi Michele.

I can confirm that no Extra file has been created and that the CFG Replace the
Previous one, as its Modification date is today.

I think I tried everything I could, including removing all files from the
Skype seven scripts, who knows, and switching to the English version of jaws
where scripts Were also installed.

What else can I try? Something in Jaws commun?? settings that could get in the
way maybe
? I have no idea.

Best,

JPR


http://www.jprykiel.com

http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 14:28, Michele Barbi a ??crit??:
Hey guys, first of all I'd like to thank Doug because I did not know these
step for copying the file location. We always learn something new, lol!
Jean, be careful to one thing which I noticed. I don't know why, but at
least here in Italian, ctrl+s opens a window like Save as, and if asked to
replace already existing file, you should say yes.
I am now reading that you did not manage to fix the issue, so make sure if
Notepad did not create an alternative file called skypeelectron.jcf.txt.
Yesterday I had to count with it working on a jsm file for another scripts
set.
Bye!
Barbuz







--
Doug Lee dgl@... http://www.dlee.org
Level Access doug.lee@... http://www.LevelAccess.com
"It is difficult to produce a television documentary that is both
incisive and probing when every twelve minutes one is interrupted by
dancing rabbits singing about toilet paper." --Rod Serling


Re: Skype 8 language and prefix key

Jean Philippe
 

Hi Doug,

the key I would like to assign is², which is the same as` on a French keyboard.

But even in other jaws versions where I haven't changed the JCF file, the default key,left bracket, is not working. I know how odd it may sound.

Best,

JPR


http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 à 19:35, Doug Lee a écrit :
I still bet the problem is that JAWS wants a particular name for that key instead of just the key itself.

Apologies if I missed it amid all else today lol, but what key are you trying to assign as the Command key? If it is a shifted key, use "Shift+" with the regular key or key name; e.g., CommandKey=T is bad, but
CommandKey=Shift+t is good.

On Wed, Oct 10, 2018 at 06:40:39PM +0200, Jean Philippe wrote:
Hi Michele.

I can confirm that no Extra file has been created and that the CFG Replace the
Previous one, as its Modification date is today.

I think I tried everything I could, including removing all files from the
Skype seven scripts, who knows, and switching to the English version of jaws
where scripts Were also installed.

What else can I try? Something in Jaws commun?? settings that could get in the
way maybe
? I have no idea.

Best,

JPR


http://www.jprykiel.com

http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 14:28, Michele Barbi a ??crit??:
Hey guys, first of all I'd like to thank Doug because I did not know these
step for copying the file location. We always learn something new, lol!
Jean, be careful to one thing which I noticed. I don't know why, but at
least here in Italian, ctrl+s opens a window like Save as, and if asked to
replace already existing file, you should say yes.
I am now reading that you did not manage to fix the issue, so make sure if
Notepad did not create an alternative file called skypeelectron.jcf.txt.
Yesterday I had to count with it working on a jsm file for another scripts
set.
Bye!
Barbuz





Re: Skype 8 language and prefix key

Doug Lee
 

I still bet the problem is that JAWS wants a particular name for that key instead of just the key itself.

Apologies if I missed it amid all else today lol, but what key are you trying to assign as the Command key? If it is a shifted key, use "Shift+" with the regular key or key name; e.g., CommandKey=T is bad, but
CommandKey=Shift+t is good.

On Wed, Oct 10, 2018 at 06:40:39PM +0200, Jean Philippe wrote:
Hi Michele.

I can confirm that no Extra file has been created and that the CFG Replace the
Previous one, as its Modification date is today.

I think I tried everything I could, including removing all files from the
Skype seven scripts, who knows, and switching to the English version of jaws
where scripts Were also installed.

What else can I try? Something in Jaws commun?? settings that could get in the
way maybe
? I have no idea.

Best,

JPR


http://www.jprykiel.com

http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 14:28, Michele Barbi a ??crit??:
Hey guys, first of all I'd like to thank Doug because I did not know these
step for copying the file location. We always learn something new, lol!
Jean, be careful to one thing which I noticed. I don't know why, but at
least here in Italian, ctrl+s opens a window like Save as, and if asked to
replace already existing file, you should say yes.
I am now reading that you did not manage to fix the issue, so make sure if
Notepad did not create an alternative file called skypeelectron.jcf.txt.
Yesterday I had to count with it working on a jsm file for another scripts
set.
Bye!
Barbuz






--
Doug Lee dgl@... http://www.dlee.org
Level Access doug.lee@... http://www.LevelAccess.com
"Nearly all men can stand adversity, but if you want to test a man's
character, give him power." -Abraham Lincoln


Re: refusal of ypdating to a new version of Skype

Mike DeZinno
 

Hello Doug,
thank you for the key application enlightenment.
Some wise person once said that all disabilities aren't equal.
I guess adding to that the myriad of devices and personalized configurations the blind can use today makes finding unique keystrokes when scripting that are also possible to execute  a real challenge.
Again another reason to thank you and appreciate your work on our behalf.

Respectfully,
Mike, in SC
 

At 10:45 AM 10/10/2018, you wrote:
Alt+Win+numbers can be obnoxious to type frequently, especially when a keyboard has only one Alt or Windows key. Alt+numbers or Ctrl+numbers are much less challenging even in such a case because the thumb can hold down one key
but not reliably two. This is my finding anyway.

To the original concern in this subthread though: I try not to override application keystrokes that exist before I start coding stuff. Skype just bit me by suddenly attaching functionality to keys I had been using for a long
time already, and even across multiple chat programs.

On Wed, Oct 10, 2018 at 09:26:01AM -0400, Mike DeZinno wrote:
   Hey Doug,
   Regarding your old keystrokes verses apps stepping on you by hijacking
   them with their newer upgrades:
   Could a simple fix just be for you to add the windows key to the key
   combos?
   I only offer that because in recent years I see a number of other
   adaptive software doing that;
   So (alt plus a number) would become (alt win number)
   I don't pretend to know a lot about scripting so I don't know if that
   is or isn't an easy thing to do, just kinda throwing it out there for
   consideration.
   Thanks for all you have already done and for what you will be doing in
   the future,
   Mike, in SC

   At 08:20 PM 10/9/2018, you wrote:

     lol yes, I can see that. that was the very thing I was talking
     about. but, to be fair, you not only had to accomodate long time
     users, but new users that were just coming to the platform also, so
     I really can't fault you on  that.
     On 10/10/2018 07:55, Doug Lee wrote:

     In the spirit of constructive feedback seeking, I wonder which
     keystrokes? I do know that my Skype 7 scripts made Alt+numbers read
     chats but that, years after I started doing that, Skype made Alt+1
     through Alt+3 jump to
     different screens in Skype. I can't think of any others but wonder
     if I'm forgetting any.
     As far as the Alt+numbers go, I had to make a difficult decision:
     Change my keystrokes after years because Skype suddenly collided
     with them and risk ticking off long-term users, or continue using
     the keys as always and provide
     alternate ways to use the new Skype commands, at the risk of ticking
     off newcomers. I chose the former and pleaded with Skype, before it
     belonged to Microsoft, to switch to Ctrl+numbers for the
     screen-switching commands. I
     lost.
     On Wed, Oct 10, 2018 at 05:43:29AM +1030, Shaun Oliver wrote:
         my only complaint with the former is I don't get enough of it.
     however,
         putting the subject back on topic, whenever I've used Doug's
     scripts in
         the past, I have never had a complaint against them, save the
     fact that
         towards the end of my using them, keystrokes that were already
         incorperated in to Skype had been remapped and rerouted through
     JAWS to
         do something other than what Skype had intended for them to do.
         On 10/10/2018 03:58, Mike DeZinno wrote:
         Hey Doug,
         I once met a man who complained about free sex;
         So why am I not surprised you get complaints about free Skype
     scrips!
         LOL
         Take care and keep the faith,
         Mike, from SC
         At 08:13 AM 10/9/2018, you wrote:
           The part that gets me almost giggling resignedly here is that
     we're
           arguing over a program that costs us nothing. People sometimes
     get
           mad at me for saying things like, "The next version of the
     Skype
           scripts will no longer
           support any JAWS versions older than 15.0." I do that when it
     lets
           me do better things in scripting than the older JAWS versions
           allowed, or when older JAWS versions simply can't handle the
     newest
           version of the application.
           But people generally have the sense to realize that I'm (1)
     not
           doing it to hurt people, (2) am actually doing it for a
     reason, and
           (3) cannot be called mean because I'm giving away for free
     what I'm
           doing anyway.
           The only time I can remember complaining about a change to a
     free
           program was when Roger suddenly vanished with very little
     warning.
           My complaint at that time was that they gave us little warning
     and
           also gave us nowhere to go.
           Microsoft has given us way plenty of warning and has also
     given us
           not one, but two places to go (Skype 8 or Skype UWP). And
     despite a
           small number of claims in this thread, we have absolutely
     solid and
           prolific proof that at
           least Skype 8 works well enough with both JAWS and NVDA to be
           usable. It has its quirks, but so did Skype 7. So Microsoft
     gave us
           the easiest feedback system for reporting them that I have
     ever
           seen, bar none: Open, type into a
           box, press Enter, done!
           Finally, if anyone wanted to complain loudly, I think it
     should have
           been me. My Command Line Interface for Skype, Clisk
           ([1][1]http://www.dlee.org/skype/clisk), is completely
     unsupported
           after the end of this month. That's a loss of
           years of my time, at least arguably.
           So why don't I yell about that one? Again, Microsoft gave
     plenty of
           warning, good explanations for why they are doing what they're
           doing, and even delayed Skype 7's demise partly because of one
           feature Clisk used, that being
           the ability to redirect and record sound from Skype. I will
           seriously miss Clisk, but that is no reason to cry foul.
           In conclusion, I'd say this Skype update should best be
     treated like
           a hurricane; and that hurricane actually has a name: Cloud.
     Cloud
           infrastructure is why this update is happening. Skype, as I
     said
           before, is changing how it
           communicates. It is starting to use a cloud structure. Skype 7
     was
           not ready for that and never will be. So Microsoft gave an
           evacuation order, with several months' warning - which is
     unusual
           for a weather bulletin lol. But
           really, in this storm, if we cling to our islands, we truly
     will end
           up lost at sea.
           On Tue, Oct 09, 2018 at 07:13:12AM -0400, Joseph Machise
     wrote:
           well, that's the trouble with Microsoft, who are they to tell
     us
           what to do.
           ----- Original Message ----- From: "Shaun Oliver"
           [2]<blindman75@...>
           To: [3]<skypeenglish@groups.io>
           Sent: Tuesday, October 09, 2018 7:11 AM
           Subject: Re: [skypeenglish] refusal of ypdating to a new
     version of
           Skype
           > as has been stated in the official notice from ms, they will
     no
           longer be
           > supporting Skype 7 or classic as it's now known. this means
     that
           you will
           > either be forced to update, or your classic skype will begin
     to
           stop
           > working until it no longer works entirely.
           >
           >
           >
           > On 9/10/2018 12:49, Josephine Hirsch wrote:
           > > Hi all,
           > >
           > >
           > > What if you refused to update to a new version of Skype? I
     like
           the
           > > Skype Classic because it is easier for me to navigate on
     Skype
           Classic
           > > than Skype 8.30, and I could never get anyone to hear me
     on
           Skype 8.30
           > > any longer, and I tried everything and no go with Skype
     8.30
           > >
           > > Thanks,
           > >
           > > Josephine
           > >
           > >
           > >
           >
           >
           >
           >
           --
           Doug Lee                 [4]dgl@...
           [5][2]http://www.dlee.org
           Level Access             [6]doug.lee@...
           [7]http://www.LevelAccess.com
           "The best executive is the one who has sense enough to pick
     good men
           to do
           what he wants done, and self-restraint enough to keep from
     meddling
           with
           them while they do it."--Theodore Roosevelt

     References
         1. [3]http://www.dlee.org/skype/clisk
         2. [4]mailto:blindman75@...
         3. [5]mailto:skypeenglish@groups.io
         4. [6]mailto:dgl@...
         5. [7]http://www.dlee.org/
         6. [8]mailto:doug.lee@...
         7. [9]http://www.levelaccess.com/
         8. [10]https://groups.io/g/skypeenglish/message/3387
         9.
     [11]mailto:skypeenglish@groups.io?subject=Re:%20Re%3A%20%5Bskypeengl
     ish%5D%20refusal%20of%20ypdating%20to%20a%20new%20version%20of%20Sky
     pe
        10.
     [12]mailto:blindman75@...?subject=Private:%20Re:%20Re%3A%20%5B
     skypeenglish%5D%20refusal%20of%20ypdating%20to%20a%20new%20version%2
     0of%20Skype
        11. [13]https://groups.io/mt/27107171/409874
        12. [14]https://groups.io/g/skypeenglish/post
        13. [15]http://www.dlee.org/skype/
        14. [16]https://groups.io/g/skypeenglish/editsub/409874
        15. [17]mailto:skypeenglish+owner@groups.io
        16. [18]https://groups.io/g/skypeenglish/leave/defanged

  

References

   1. http://www.dlee.org/skype/clisk
   2. http://www.dlee.org/
   3. http://www.dlee.org/skype/clisk
   4. mailto:blindman75@...
   5. mailto:skypeenglish@groups.io
   6. mailto:dgl@...
   7. http://www.dlee.org/
   8. mailto:doug.lee@...
   9. http://www.levelaccess.com/
  10. https://groups.io/g/skypeenglish/message/3387
  11. mailto:skypeenglish@groups.io%3Fsubject=Re:%20Re:%20%5Bskypeenglish%5D%20refusal%20of%20ypdating%20to%20a%20new%20version%20of%20Skype
  12. mailto:blindman75@...%3Fsubject=Private:%20Re:%20Re:%20%5Bskypeenglish%5D%20refusal%20of%20ypdating%20to%20a%20new%20version%20of%20Skype
  13. https://groups.io/mt/27107171/409874
  14. https://groups.io/g/skypeenglish/post
  15. http://www.dlee.org/skype/
  16. https://groups.io/g/skypeenglish/editsub/409874
  17. mailto:skypeenglish+owner@groups.io
  18. https://groups.io/g/skypeenglish/leave/defanged
  19. https://groups.io/g/skypeenglish/message/3408
  20. mailto:skypeenglish@groups.io?subject=Re:%20Re%3A%20%5Bskypeenglish%5D%20refusal%20of%20ypdating%20to%20a%20new%20version%20of%20Skype
  21. mailto:mike@...?subject=Private:%20Re:%20Re%3A%20%5Bskypeenglish%5D%20refusal%20of%20ypdating%20to%20a%20new%20version%20of%20Skype
  22. https://groups.io/mt/27107171/409874
  23. https://groups.io/g/skypeenglish/post
  24. http://www.dlee.org/skype/
  25. https://groups.io/g/skypeenglish/editsub/409874
  26. mailto:skypeenglish+owner@groups.io
  27. https://groups.io/g/skypeenglish/leave/defanged

--
Doug Lee                 dgl@...                http://www.dlee.org
Level Access             doug.lee@...    http://www.LevelAccess.com
"The nice thing about standards is that there are so many of them
to choose from." -- Andrew Tanenbaum


Re: Skype 8 language and prefix key

Jean Philippe
 

Hi Michele.

I can confirm that no Extra file has been created and that the CFG Replace the Previous one, as its Modification date is today.

I think I tried everything I could, including removing all files from the Skype seven scripts, who knows, and switching to the English version of jaws where scripts Were also installed.

What else can I try? Something in Jaws commun  settings that could get in the way maybe
? I have no idea.

Best,

JPR


http://www.jprykiel.com

http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 à 14:28, Michele Barbi a écrit :
Hey guys, first of all I'd like to thank Doug because I did not know these step for copying the file location. We always learn something new, lol!
Jean, be careful to one thing which I noticed. I don't know why, but at least here in Italian, ctrl+s opens a window like Save as, and if asked to replace already existing file, you should say yes.
I am now reading that you did not manage to fix the issue, so make sure if Notepad did not create an alternative file called skypeelectron.jcf.txt. Yesterday I had to count with it working on a jsm file for another scripts set.
Bye!
Barbuz



Re: refusal of ypdating to a new version of Skype

Doug Lee
 

Alt+Win+numbers can be obnoxious to type frequently, especially when a keyboard has only one Alt or Windows key. Alt+numbers or Ctrl+numbers are much less challenging even in such a case because the thumb can hold down one key
but not reliably two. This is my finding anyway.

To the original concern in this subthread though: I try not to override application keystrokes that exist before I start coding stuff. Skype just bit me by suddenly attaching functionality to keys I had been using for a long
time already, and even across multiple chat programs.

On Wed, Oct 10, 2018 at 09:26:01AM -0400, Mike DeZinno wrote:
Hey Doug,
Regarding your old keystrokes verses apps stepping on you by hijacking
them with their newer upgrades:
Could a simple fix just be for you to add the windows key to the key
combos?
I only offer that because in recent years I see a number of other
adaptive software doing that;
So (alt plus a number) would become (alt win number)
I don't pretend to know a lot about scripting so I don't know if that
is or isn't an easy thing to do, just kinda throwing it out there for
consideration.
Thanks for all you have already done and for what you will be doing in
the future,
Mike, in SC

At 08:20 PM 10/9/2018, you wrote:

lol yes, I can see that. that was the very thing I was talking
about. but, to be fair, you not only had to accomodate long time
users, but new users that were just coming to the platform also, so
I really can't fault you on that.
On 10/10/2018 07:55, Doug Lee wrote:

In the spirit of constructive feedback seeking, I wonder which
keystrokes? I do know that my Skype 7 scripts made Alt+numbers read
chats but that, years after I started doing that, Skype made Alt+1
through Alt+3 jump to
different screens in Skype. I can't think of any others but wonder
if I'm forgetting any.
As far as the Alt+numbers go, I had to make a difficult decision:
Change my keystrokes after years because Skype suddenly collided
with them and risk ticking off long-term users, or continue using
the keys as always and provide
alternate ways to use the new Skype commands, at the risk of ticking
off newcomers. I chose the former and pleaded with Skype, before it
belonged to Microsoft, to switch to Ctrl+numbers for the
screen-switching commands. I
lost.
On Wed, Oct 10, 2018 at 05:43:29AM +1030, Shaun Oliver wrote:
my only complaint with the former is I don't get enough of it.
however,
putting the subject back on topic, whenever I've used Doug's
scripts in
the past, I have never had a complaint against them, save the
fact that
towards the end of my using them, keystrokes that were already
incorperated in to Skype had been remapped and rerouted through
JAWS to
do something other than what Skype had intended for them to do.
On 10/10/2018 03:58, Mike DeZinno wrote:
Hey Doug,
I once met a man who complained about free sex;
So why am I not surprised you get complaints about free Skype
scrips!
LOL
Take care and keep the faith,
Mike, from SC
At 08:13 AM 10/9/2018, you wrote:
The part that gets me almost giggling resignedly here is that
we're
arguing over a program that costs us nothing. People sometimes
get
mad at me for saying things like, "The next version of the
Skype
scripts will no longer
support any JAWS versions older than 15.0." I do that when it
lets
me do better things in scripting than the older JAWS versions
allowed, or when older JAWS versions simply can't handle the
newest
version of the application.
But people generally have the sense to realize that I'm (1)
not
doing it to hurt people, (2) am actually doing it for a
reason, and
(3) cannot be called mean because I'm giving away for free
what I'm
doing anyway.
The only time I can remember complaining about a change to a
free
program was when Roger suddenly vanished with very little
warning.
My complaint at that time was that they gave us little warning
and
also gave us nowhere to go.
Microsoft has given us way plenty of warning and has also
given us
not one, but two places to go (Skype 8 or Skype UWP). And
despite a
small number of claims in this thread, we have absolutely
solid and
prolific proof that at
least Skype 8 works well enough with both JAWS and NVDA to be
usable. It has its quirks, but so did Skype 7. So Microsoft
gave us
the easiest feedback system for reporting them that I have
ever
seen, bar none: Open, type into a
box, press Enter, done!
Finally, if anyone wanted to complain loudly, I think it
should have
been me. My Command Line Interface for Skype, Clisk
([1][1]http://www.dlee.org/skype/clisk), is completely
unsupported
after the end of this month. That's a loss of
years of my time, at least arguably.
So why don't I yell about that one? Again, Microsoft gave
plenty of
warning, good explanations for why they are doing what they're
doing, and even delayed Skype 7's demise partly because of one
feature Clisk used, that being
the ability to redirect and record sound from Skype. I will
seriously miss Clisk, but that is no reason to cry foul.
In conclusion, I'd say this Skype update should best be
treated like
a hurricane; and that hurricane actually has a name: Cloud.
Cloud
infrastructure is why this update is happening. Skype, as I
said
before, is changing how it
communicates. It is starting to use a cloud structure. Skype 7
was
not ready for that and never will be. So Microsoft gave an
evacuation order, with several months' warning - which is
unusual
for a weather bulletin lol. But
really, in this storm, if we cling to our islands, we truly
will end
up lost at sea.
On Tue, Oct 09, 2018 at 07:13:12AM -0400, Joseph Machise
wrote:
well, that's the trouble with Microsoft, who are they to tell
us
what to do.
----- Original Message ----- From: "Shaun Oliver"
[2]<blindman75@...>
To: [3]<skypeenglish@groups.io>
Sent: Tuesday, October 09, 2018 7:11 AM
Subject: Re: [skypeenglish] refusal of ypdating to a new
version of
Skype
> as has been stated in the official notice from ms, they will
no
longer be
> supporting Skype 7 or classic as it's now known. this means
that
you will
> either be forced to update, or your classic skype will begin
to
stop
> working until it no longer works entirely.
>
>
>
> On 9/10/2018 12:49, Josephine Hirsch wrote:
> > Hi all,
> >
> >
> > What if you refused to update to a new version of Skype? I
like
the
> > Skype Classic because it is easier for me to navigate on
Skype
Classic
> > than Skype 8.30, and I could never get anyone to hear me
on
Skype 8.30
> > any longer, and I tried everything and no go with Skype
8.30
> >
> > Thanks,
> >
> > Josephine
> >
> >
> >
>
>
>
>
--
Doug Lee [4]dgl@...
[5][2]http://www.dlee.org
Level Access [6]doug.lee@...
[7]http://www.LevelAccess.com
"The best executive is the one who has sense enough to pick
good men
to do
what he wants done, and self-restraint enough to keep from
meddling
with
them while they do it."--Theodore Roosevelt

References
1. [3]http://www.dlee.org/skype/clisk
2. [4]mailto:blindman75@...
3. [5]mailto:skypeenglish@groups.io
4. [6]mailto:dgl@...
5. [7]http://www.dlee.org/
6. [8]mailto:doug.lee@...
7. [9]http://www.levelaccess.com/
8. [10]https://groups.io/g/skypeenglish/message/3387
9.
[11]mailto:skypeenglish@groups.io?subject=Re:%20Re%3A%20%5Bskypeengl
ish%5D%20refusal%20of%20ypdating%20to%20a%20new%20version%20of%20Sky
pe
10.
[12]mailto:blindman75@...?subject=Private:%20Re:%20Re%3A%20%5B
skypeenglish%5D%20refusal%20of%20ypdating%20to%20a%20new%20version%2
0of%20Skype
11. [13]https://groups.io/mt/27107171/409874
12. [14]https://groups.io/g/skypeenglish/post
13. [15]http://www.dlee.org/skype/
14. [16]https://groups.io/g/skypeenglish/editsub/409874
15. [17]mailto:skypeenglish+owner@groups.io
16. [18]https://groups.io/g/skypeenglish/leave/defanged



References

1. http://www.dlee.org/skype/clisk
2. http://www.dlee.org/
3. http://www.dlee.org/skype/clisk
4. mailto:blindman75@...
5. mailto:skypeenglish@groups.io
6. mailto:dgl@...
7. http://www.dlee.org/
8. mailto:doug.lee@...
9. http://www.levelaccess.com/
10. https://groups.io/g/skypeenglish/message/3387
11. mailto:skypeenglish@groups.io%3Fsubject=Re:%20Re:%20%5Bskypeenglish%5D%20refusal%20of%20ypdating%20to%20a%20new%20version%20of%20Skype
12. mailto:blindman75@...%3Fsubject=Private:%20Re:%20Re:%20%5Bskypeenglish%5D%20refusal%20of%20ypdating%20to%20a%20new%20version%20of%20Skype
13. https://groups.io/mt/27107171/409874
14. https://groups.io/g/skypeenglish/post
15. http://www.dlee.org/skype/
16. https://groups.io/g/skypeenglish/editsub/409874
17. mailto:skypeenglish+owner@groups.io
18. https://groups.io/g/skypeenglish/leave/defanged
19. https://groups.io/g/skypeenglish/message/3408
20. mailto:skypeenglish@groups.io?subject=Re:%20Re%3A%20%5Bskypeenglish%5D%20refusal%20of%20ypdating%20to%20a%20new%20version%20of%20Skype
21. mailto:mike@...?subject=Private:%20Re:%20Re%3A%20%5Bskypeenglish%5D%20refusal%20of%20ypdating%20to%20a%20new%20version%20of%20Skype
22. https://groups.io/mt/27107171/409874
23. https://groups.io/g/skypeenglish/post
24. http://www.dlee.org/skype/
25. https://groups.io/g/skypeenglish/editsub/409874
26. mailto:skypeenglish+owner@groups.io
27. https://groups.io/g/skypeenglish/leave/defanged

--
Doug Lee dgl@... http://www.dlee.org
Level Access doug.lee@... http://www.LevelAccess.com
"The nice thing about standards is that there are so many of them
to choose from." -- Andrew Tanenbaum


Re: refusal of ypdating to a new version of Skype

Mike DeZinno
 

Hey Doug,
Regarding your old keystrokes verses apps stepping on you by hijacking them with their newer upgrades:
Could a simple fix just be for you to add the windows key to the key combos?
I only offer that because in recent years I see a number of other adaptive software doing that;
So (alt plus a number) would become (alt win number)
I don't pretend to know a lot about scripting so I don't know if that is or isn't an easy thing to do, just kinda throwing it out there for consideration.

Thanks for all you have already done and for what you will be doing in the future,
Mike, in SC
 


At 08:20 PM 10/9/2018, you wrote:
lol yes, I can see that. that was the very thing I was talking about. but, to be fair, you not only had to accomodate long time users, but new users that were just coming to the platform also, so I really can't fault you on  that.



On 10/10/2018 07:55, Doug Lee wrote:
In the spirit of constructive feedback seeking, I wonder which keystrokes? I do know that my Skype 7 scripts made Alt+numbers read chats but that, years after I started doing that, Skype made Alt+1 through Alt+3 jump to
different screens in Skype. I can't think of any others but wonder if I'm forgetting any.

As far as the Alt+numbers go, I had to make a difficult decision: Change my keystrokes after years because Skype suddenly collided with them and risk ticking off long-term users, or continue using the keys as always and provide
alternate ways to use the new Skype commands, at the risk of ticking off newcomers. I chose the former and pleaded with Skype, before it belonged to Microsoft, to switch to Ctrl+numbers for the screen-switching commands. I
lost.

On Wed, Oct 10, 2018 at 05:43:29AM +1030, Shaun Oliver wrote:
    my only complaint with the former is I don't get enough of it. however,
    putting the subject back on topic, whenever I've used Doug's scripts in
    the past, I have never had a complaint against them, save the fact that
    towards the end of my using them, keystrokes that were already
    incorperated in to Skype had been remapped and rerouted through JAWS to
    do something other than what Skype had intended for them to do.

    On 10/10/2018 03:58, Mike DeZinno wrote:

    Hey Doug,
    I once met a man who complained about free sex;
    So why am I not surprised you get complaints about free Skype scrips!
    LOL
    Take care and keep the faith,
    Mike, from SC
    At 08:13 AM 10/9/2018, you wrote:

      The part that gets me almost giggling resignedly here is that we're
      arguing over a program that costs us nothing. People sometimes get
      mad at me for saying things like, "The next version of the Skype
      scripts will no longer
      support any JAWS versions older than 15.0." I do that when it lets
      me do better things in scripting than the older JAWS versions
      allowed, or when older JAWS versions simply can't handle the newest
      version of the application.
      But people generally have the sense to realize that I'm (1) not
      doing it to hurt people, (2) am actually doing it for a reason, and
      (3) cannot be called mean because I'm giving away for free what I'm
      doing anyway.
      The only time I can remember complaining about a change to a free
      program was when Roger suddenly vanished with very little warning.
      My complaint at that time was that they gave us little warning and
      also gave us nowhere to go.
      Microsoft has given us way plenty of warning and has also given us
      not one, but two places to go (Skype 8 or Skype UWP). And despite a
      small number of claims in this thread, we have absolutely solid and
      prolific proof that at
      least Skype 8 works well enough with both JAWS and NVDA to be
      usable. It has its quirks, but so did Skype 7. So Microsoft gave us
      the easiest feedback system for reporting them that I have ever
      seen, bar none: Open, type into a
      box, press Enter, done!
      Finally, if anyone wanted to complain loudly, I think it should have
      been me. My Command Line Interface for Skype, Clisk
      ([1]http://www.dlee.org/skype/clisk), is completely unsupported
      after the end of this month. That's a loss of
      years of my time, at least arguably.
      So why don't I yell about that one? Again, Microsoft gave plenty of
      warning, good explanations for why they are doing what they're
      doing, and even delayed Skype 7's demise partly because of one
      feature Clisk used, that being
      the ability to redirect and record sound from Skype. I will
      seriously miss Clisk, but that is no reason to cry foul.
      In conclusion, I'd say this Skype update should best be treated like
      a hurricane; and that hurricane actually has a name: Cloud. Cloud
      infrastructure is why this update is happening. Skype, as I said
      before, is changing how it
      communicates. It is starting to use a cloud structure. Skype 7 was
      not ready for that and never will be. So Microsoft gave an
      evacuation order, with several months' warning - which is unusual
      for a weather bulletin lol. But
      really, in this storm, if we cling to our islands, we truly will end
      up lost at sea.
      On Tue, Oct 09, 2018 at 07:13:12AM -0400, Joseph Machise wrote:
      well, that's the trouble with Microsoft, who are they to tell us
      what to do.
      ----- Original Message ----- From: "Shaun Oliver"
      [2]<blindman75@...>
      To: [3]<skypeenglish@groups.io>
      Sent: Tuesday, October 09, 2018 7:11 AM
      Subject: Re: [skypeenglish] refusal of ypdating to a new version of
      Skype
      > as has been stated in the official notice from ms, they will no
      longer be
      > supporting Skype 7 or classic as it's now known. this means that
      you will
      > either be forced to update, or your classic skype will begin to
      stop
      > working until it no longer works entirely.
      >
      >
      >
      > On 9/10/2018 12:49, Josephine Hirsch wrote:
      > > Hi all,
      > >
      > >
      > > What if you refused to update to a new version of Skype? I like
      the
      > > Skype Classic because it is easier for me to navigate on Skype
      Classic
      > > than Skype 8.30, and I could never get anyone to hear me on
      Skype 8.30
      > > any longer, and I tried everything and no go with Skype 8.30
      > >
      > > Thanks,
      > >
      > > Josephine
      > >
      > >
      > >
      >
      >
      >
      >
      --
      Doug Lee                 [4]dgl@...
      [5]http://www.dlee.org
      Level Access             [6]doug.lee@...
      [7]http://www.LevelAccess.com
      "The best executive is the one who has sense enough to pick good men
      to do
      what he wants done, and self-restraint enough to keep from meddling
      with
      them while they do it."--Theodore Roosevelt

   

References

    1. http://www.dlee.org/skype/clisk
    2. mailto:blindman75@...
    3. mailto:skypeenglish@groups.io
    4. mailto:dgl@...
    5. http://www.dlee.org/
    6. mailto:doug.lee@...
    7. http://www.levelaccess.com/
    8. https://groups.io/g/skypeenglish/message/3387
    9. mailto:skypeenglish@groups.io?subject=Re:%20Re%3A%20%5Bskypeenglish%5D%20refusal%20of%20ypdating%20to%20a%20new%20version%20of%20Skype
   10. mailto:blindman75@...?subject=Private:%20Re:%20Re%3A%20%5Bskypeenglish%5D%20refusal%20of%20ypdating%20to%20a%20new%20version%20of%20Skype
   11. https://groups.io/mt/27107171/409874
   12. https://groups.io/g/skypeenglish/post
   13. http://www.dlee.org/skype/
   14. https://groups.io/g/skypeenglish/editsub/409874
   15. mailto:skypeenglish+owner@groups.io
   16. https://groups.io/g/skypeenglish/leave/defanged





Re: Skype 8 language and prefix key

Michele Barbi
 

Hey guys, first of all I'd like to thank Doug because I did not know these step for copying the file location. We always learn something new, lol!
Jean, be careful to one thing which I noticed. I don't know why, but at least here in Italian, ctrl+s opens a window like Save as, and if asked to replace already existing file, you should say yes.
I am now reading that you did not manage to fix the issue, so make sure if Notepad did not create an alternative file called skypeelectron.jcf.txt. Yesterday I had to count with it working on a jsm file for another scripts set.
Bye!
Barbuz


Re: Skype 8 language and prefix key

Jean Philippe
 

Hi Doug,

I was able to do the change, but still no luck. No prefix key, the only thing that happens when you press the key in question is that Jaws pronounces it. Same in Jaws 18.

I wonder what could be happen

ing.

Best,

JPR

http://jeanphilipperykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 à 14:05, Doug Lee a écrit :
Ah, I thought Notepad would be an option there... so here is one alternative:

Open "Explore My Settings" for your JAWS version using your Start menu or Start screen, or otherwise navigate to that folder manually. One manual approach would be to open %APPDATA% from the Run box, then go to Freedom
Scientific, JAWS, your JAWS version, Settings, fra (if that's your language code; I forget that one).

Find skypeelectron.jcf and press Shift with the Applications key. This gets you a longer Context menu than usual.

From this extended menu, select "Copy as path" to get the full path of the file onto the clipboard.
Now open Notepad, type Ctrl+O, and paste that path into the box to open the file there.

Find the [MKCSOptions] line, then the line below that. Edit what comes after the = sign to be the key you want. Save with Ctrl+S and test. If this does not work, try using a name for the key; e.g., ` versus accent.

If you did not find a [MKCSOptions] line at all, go to the bottom of the file, add one, then on the next line enter something like CommandKey=[ (replacing [ with your key of course). Save with Ctrl+S and test.

On Wed, Oct 10, 2018 at 01:28:42PM +0200, Jean Philippe wrote:
hi Doug.

I need to know how to do this. First, do you have to open this file in
notepad? How do you do this? If I type Application key on a JCF file, and go
to open with, notepad is not in the list.

Then, do you do a search for MKCSOptions?

thanks,

JPR



http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 13:07, Doug Lee a ??crit??:
Yes, the jcf. The jss would contain a default value, but the jcf is where any updates to it go for a user; so the jcf setting will override the jss value for that key if found.

On Wed, Oct 10, 2018 at 01:02:01PM +0200, Jean Philippe wrote:
Hi Doug.

I'm using Jaws 2018?? under French Windows 7, Jaws key plus F1 twice opens the
Scripts user guide, and Jaws key plus Q reports the revision
number, which makes me think that the script is active> But the left bracket
sign only Gets Jaws to pronounce, left bracket.

So it's the JCF I should look at, not theJSS?

Best,

JP


http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 12:40, Doug Lee a ??crit??:
My guess is it at some point got changed to something unexpected. You can always try editing it in skypeelectron.jcf. If you've tried to change the key, there should be an MKCSOptions section in that file containing the
assignment. If you change it there, my script code will update all the jkm entries that use it when you next switch focus back into Skype.

On Wed, Oct 10, 2018 at 10:24:00AM +0200, Jean Philippe wrote:
Hi Doug and all,

I just installed Skype eight and its corresponding script. Still under French
Windows 7, it works okay but I cannot use the prefix key nor can I change it.
The scripts seem to be well installed, as insert Q reports Revision 60 for??
Skype Windows desktop 8 electron

I wonder if it is because my Skype language is set to French?

Thanks for helping,

best,

JPR

http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel









Re: Skype 8 language and prefix key

Doug Lee
 

Ah, I thought Notepad would be an option there... so here is one alternative:

Open "Explore My Settings" for your JAWS version using your Start menu or Start screen, or otherwise navigate to that folder manually. One manual approach would be to open %APPDATA% from the Run box, then go to Freedom
Scientific, JAWS, your JAWS version, Settings, fra (if that's your language code; I forget that one).

Find skypeelectron.jcf and press Shift with the Applications key. This gets you a longer Context menu than usual.

From this extended menu, select "Copy as path" to get the full path of the file onto the clipboard.

Now open Notepad, type Ctrl+O, and paste that path into the box to open the file there.

Find the [MKCSOptions] line, then the line below that. Edit what comes after the = sign to be the key you want. Save with Ctrl+S and test. If this does not work, try using a name for the key; e.g., ` versus accent.

If you did not find a [MKCSOptions] line at all, go to the bottom of the file, add one, then on the next line enter something like CommandKey=[ (replacing [ with your key of course). Save with Ctrl+S and test.

On Wed, Oct 10, 2018 at 01:28:42PM +0200, Jean Philippe wrote:
hi Doug.

I need to know how to do this. First, do you have to open this file in
notepad? How do you do this? If I type Application key on a JCF file, and go
to open with, notepad is not in the list.

Then, do you do a search for MKCSOptions?

thanks,

JPR



http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 13:07, Doug Lee a ??crit??:
Yes, the jcf. The jss would contain a default value, but the jcf is where any updates to it go for a user; so the jcf setting will override the jss value for that key if found.

On Wed, Oct 10, 2018 at 01:02:01PM +0200, Jean Philippe wrote:
Hi Doug.

I'm using Jaws 2018?? under French Windows 7, Jaws key plus F1 twice opens the
Scripts user guide, and Jaws key plus Q reports the revision
number, which makes me think that the script is active> But the left bracket
sign only Gets Jaws to pronounce, left bracket.

So it's the JCF I should look at, not theJSS?

Best,

JP


http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 12:40, Doug Lee a ??crit??:
My guess is it at some point got changed to something unexpected. You can always try editing it in skypeelectron.jcf. If you've tried to change the key, there should be an MKCSOptions section in that file containing the
assignment. If you change it there, my script code will update all the jkm entries that use it when you next switch focus back into Skype.

On Wed, Oct 10, 2018 at 10:24:00AM +0200, Jean Philippe wrote:
Hi Doug and all,

I just installed Skype eight and its corresponding script. Still under French
Windows 7, it works okay but I cannot use the prefix key nor can I change it.
The scripts seem to be well installed, as insert Q reports Revision 60 for??
Skype Windows desktop 8 electron

I wonder if it is because my Skype language is set to French?

Thanks for helping,

best,

JPR

http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel











--
Doug Lee dgl@... http://www.dlee.org
Level Access doug.lee@... http://www.LevelAccess.com
There is more freedom in knowing how to handle pain than in knowing
how to avoid it. (4/29/01)


Re: Skype 8 language and prefix key

Jean Philippe
 

hi Doug.

I need to know how to do this. First, do you have to open this file in notepad? How do you do this? If I type Application key on a JCF file, and go to open with, notepad is not in the list.

Then, do you do a search for MKCSOptions?

thanks,

JPR



http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 à 13:07, Doug Lee a écrit :
Yes, the jcf. The jss would contain a default value, but the jcf is where any updates to it go for a user; so the jcf setting will override the jss value for that key if found.

On Wed, Oct 10, 2018 at 01:02:01PM +0200, Jean Philippe wrote:
Hi Doug.

I'm using Jaws 2018?? under French Windows 7, Jaws key plus F1 twice opens the
Scripts user guide, and Jaws key plus Q reports the revision
number, which makes me think that the script is active> But the left bracket
sign only Gets Jaws to pronounce, left bracket.

So it's the JCF I should look at, not theJSS?

Best,

JP


http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 12:40, Doug Lee a ??crit??:
My guess is it at some point got changed to something unexpected. You can always try editing it in skypeelectron.jcf. If you've tried to change the key, there should be an MKCSOptions section in that file containing the
assignment. If you change it there, my script code will update all the jkm entries that use it when you next switch focus back into Skype.

On Wed, Oct 10, 2018 at 10:24:00AM +0200, Jean Philippe wrote:
Hi Doug and all,

I just installed Skype eight and its corresponding script. Still under French
Windows 7, it works okay but I cannot use the prefix key nor can I change it.
The scripts seem to be well installed, as insert Q reports Revision 60 for??
Skype Windows desktop 8 electron

I wonder if it is because my Skype language is set to French?

Thanks for helping,

best,

JPR

http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel









Re: Skype 8 language and prefix key

Doug Lee
 

Yes, the jcf. The jss would contain a default value, but the jcf is where any updates to it go for a user; so the jcf setting will override the jss value for that key if found.

On Wed, Oct 10, 2018 at 01:02:01PM +0200, Jean Philippe wrote:
Hi Doug.

I'm using Jaws 2018?? under French Windows 7, Jaws key plus F1 twice opens the
Scripts user guide, and Jaws key plus Q reports the revision
number, which makes me think that the script is active> But the left bracket
sign only Gets Jaws to pronounce, left bracket.

So it's the JCF I should look at, not theJSS?

Best,

JP


http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel

Le 10/10/2018 ?? 12:40, Doug Lee a ??crit??:
My guess is it at some point got changed to something unexpected. You can always try editing it in skypeelectron.jcf. If you've tried to change the key, there should be an MKCSOptions section in that file containing the
assignment. If you change it there, my script code will update all the jkm entries that use it when you next switch focus back into Skype.

On Wed, Oct 10, 2018 at 10:24:00AM +0200, Jean Philippe wrote:
Hi Doug and all,

I just installed Skype eight and its corresponding script. Still under French
Windows 7, it works okay but I cannot use the prefix key nor can I change it.
The scripts seem to be well installed, as insert Q reports Revision 60 for??
Skype Windows desktop 8 electron

I wonder if it is because my Skype language is set to French?

Thanks for helping,

best,

JPR

http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel










--
Doug Lee dgl@... http://www.dlee.org
Level Access doug.lee@... http://www.LevelAccess.com
"No person is your friend who demands your silence or denies your
right to grow." --Alice Walker